The 5V-3.3V Voltage Translator Board features two LVXC3245 8-bit, dual supply non-inverting voltage interface transceivers. Made using dual metal CMOS technology, the LVXC3245 module includes two separate supply rails that allow transition from a 5V to 3.3V system environment. The ...

The AVR-Ready2 Board is the best solution for fast and simple development of 28-pin AVR microcontroller applications. 28-pin AVR A USB supported prototype board for 28-pin AVR microcontrollers with IDC10 extension (AVR CPU not included) Power Supply The board is ...

A3967SLB built-in translator circuit The Bipolar Stepper Motor Driver Board operates with help of an integrated A3967SLB circuit. This circuit features thermal shutdown with hysteresis, crossover-current protection and under-voltage lockout, and its operation mode depends on the logic state of ...

MCP2515 CAN ControllerMCP2515 is a stand-alone Controller Area Network (CAN) controller that is capable of transmitting and receiving both standard and extended data and remote frames. It communicates with MCUs using the industry standard SPI interfaces. The CAN controller comes ...

IC/Module: TSL230BR Programmable Light-To-Frequency Converter TSL230BR is a light-to-frequency converter that combines a configurable silicon photodiode and a current-to-frequency converter. The output can be either a pulse train or a square wave with frequency directly proportional to light intensity. It ...

Designed with innovative features, the mikroMedia™ PROTO shield is a perfect match for a wide range of target boards. This pin-compatible expansion board enables the user to add extra functionality to the mikroMedia™ boards. It is designed with double rows ...

MMCX-SMA Cable, designed for use with the SmartGM862 Board to connect to an external antenna.

The PICflash Experimental Board will give you an exceptional ease of programming microcontrollers. It features 8-, 10-, 14-, 18-, 28- and 40-pin DIP sockets. There is also a 40-pin ZIF Socket for easy microcontroller handling. When the programming procedure is ...

Add potentiometer functionality to the design using the Potentiometer Board. Designed for testing analog inputs of a microcontroller on a development system, the Potentiometer Board is equipped with eight 10K potentiometers with related jumpers that allows user to enable/disable each ...

Platic case for Ready for XMEGA development board in grey colour.

The Serial 7-seg Display Board features a compact, serial input/output common-cathode display driver MAX7219 used to interface MCUs to 7-segment numeric LED displays via SPI interface. The chip includes a BCD code-B decoder, multiplex scan circuitry, segment and digit drivers ...

The Serial GLCD 240x128 Adapter Board enables you to easily connect your GLCD T6963C (Toshiba) and save MCU pins. A 16-bit I/O expander MCP23S17 is provided on the board thus decreasing the number of MCU pins needed for running this ...

Board Connections The SmartADAPT2 MINI Board is connected to the development system using 2x5 connectors CN1, which is connected to the development systems port via a flat cable with IDC10 connectors. For connection with another accessory board or device, use ...

Rated voltage: 5VDC Number of Phase 4 Speed Variation Ratio 1/64 Stride Angle 5.625° /64 Frequency 100Hz DC resistance 50Ω ±7%(25℃) Idle In-traction Frequency > 600Hz Idle Out-traction Frequency > 1000Hz In-traction Torque >34.3mN.m(120Hz) Self-positioning Torque >34.3mN.m Friction torque 600-1200 ...

Type LCD Display size 2.8" | 320x240px Touch Screen Resistive Interface Analog Input Voltage 3.3V,5V

Work Principle The working principle of a touch panel is based on the voltage change caused by a touch or pressure applied to the touch screen. The touch screen design enables the voltage change detection. Separated by an air gap, ...

Resistive Touch-Screen Concept A resistive touch screen is fabricated with two transparent, flexible sheets coated with a conductive material stacked on top of each other, separated by an air gap. When pressure is applied by a finger or a stylus ...

IC/Module: MCP73832 Single-Cell Charge Management Controller The USB Charger Board is based on the Microchip MCP73832 is a miniature, single-cell, fully-integrated Li-Ion/Li-Polymer charge management controller. This linear charge management controller employs a constant-current/constant-voltage charge algorithm with selectable preconditioning and charge ...

IC/Module: MCP2200 USB-to-UART Serial Converter.MCP2200 is a USB-to-UART serial converter that allows USB connectivity for prototype devices with UART interface. Designed for low-power consumption, MCP2200 has 256 bytes of integrated user EEPROM and eight GPIO pins.It also has a USB ...

IC/Module: FT232R Serial UART to USB Interface The FT232R is a fully integrated serial UART to USB interface that reduces the external component count by including external EEPROM, clock circuit and USB resistors onto the device. This way, it also ...

The VOLT is a smart USB Li-Polymer battery charger. It features power management circuitry with an MCP73832, which can charge the battery over USB connector. Using provided screw terminals (VSYS and GND) VOLT can also be used to power your ...