The Gyro Click Board™ is an add-on board in mikroBUS form factor. It features L3GD20 three-axis digital gyroscope module capable of providing the measured angular rate, as well as ambient temperature. The L3GD20 has a full scale of ±250 / ...

Now add compass to your design using the Compass Click Board™ from MikroElektronika to your design. This accessory board incorporates an ultra-compact LSM303DLHC e-compass module that showcases low power consumption and high performance. The module has a 3D digital linear ...

The Current Click Board™ is an add-on board used for measurement of electric current. It features INA196 current shunt monitor, MCP3201 12-bit ADC, MAX6106 voltage reference as well as two screw terminals. The click is designed to run either 3.3V ...

IC/Module: FT2232H IC FT2232H is a hi-speed dual USB UART/FIFO IC that belongs to FTDIs 5th generation of USB devices. This chip can be easily configured in different industry standard serial or parallel interfaces. It features two multi-protocol synchronous serial ...

IC/module: LPS331AP LPS331AP is a digital output pressure sensor offered in an ultra-compact holed cap land grid array package. Designed to measure pressure or temperature, this chip features a monolithic sensing element that detects pressure while an IC interface that ...

The Light Click Board™ is the add-on board with PD15-22CTR8 PIN photodiode, providing an effective and easy way to measure ambient light intensity. It also features MAX6106 voltage reference and MCP3201 ADC with SPI interface. Measured ambient light intensity is ...

IC/Module: CC2500 2.4 GHz RF Transceiver Intended for very low-power wireless applications, CC2500 is a 2.4 GHz transceiver integrated with a highly configurable baseband modem. It features a configurable data rate up to 500 kBaud, and is designed to work ...

The Joystick Click Board™ is a smart navigation key concept based on contactless, magnetic movement detection. It features AS5013 Hall IC as well as N50P105 miniature magnetic joystick module. The AS5013 includes five integrated Hall sensing elements which are monitoring ...

The DC MOTOR Click Board™ is a DC motor driver board in mikroBUS form factor. It features the DRV8833RTYH-Bridge motor driver, 74HC4053 multiplexer and two screw terminals. The 74HC4053 IC is incorporated into the design in order to run the ...

The Stepper Click Board™ is a complete solution for driving bipolar stepper motors with full/half and micro-steps. It features the A3967 IC from Allegro Microsystems with proprietary Satlington™ sink drivers on its outputs, which ensure high efficiency and reliable operation ...

Key Features nRF8001 Bluetooth low energy RF transceiver 16 MHz crystal oscillator Ultra-low peak current consumption <14 mA Low current for connection oriented profiles, typically 2 μA PCB trace antenna BLE Android app Interface: SPI 3.3V power supply IC/Module: nRF8001 ...

The Thumbstick Click Board™ is a high precision input device. It features a dual axis, spring return, pushbutton enabled joystick (similar to the ones used on joypads on popular gaming consoles), and a MCP3204 12-bit A/D converter. The joystick unit ...

Small but Bright and Crisp Display OLED W Click Board™ features a passive matrix monochrome OLED display featuring small (19.3 x 7.8mm) active display area with a bright and crisp 96 x 39px resolution. The wide viewing angle allows the ...

How Does The OLED B Click Board™ Work? The OLED B Click Board™ as its foundation uses the MI9639BO-B2, a 19.3x7.8mm 96x39px light blue monochrome passive matrix OLED display from Multi-Inno Technology. The MI9639BO-B2 display features an SSD1306, a 128x64 ...

IC/Module: ML8511 UV sensor IC The ML8511 UV sensor is an ultraviolet light sensor that outputs an analog signal in relation to the amount of UV light it detects. Whether using the sensor indoor or outdoor, it measures ultraviolet light ...

Adjustable Signal Resolution The default resolution for relative humidity and temperature readings in HTU21D Click Board™ is set to 12-bit and 14-bit, respectively. However, the humidity resolution can be arranged between 8 and 12 bits, and temperature resolution between 12 ...

IC/module: W5500 Hardwired TCP/IP embedded Ethernet controller The W5500 chip is a 48-pin, 10/100 BASE-TX standalone Ethernet controller with a hardwired TCP/IP Internet protocol offload engine. This module enables simplified internet connection for embedded systems while utilising SPI (Serial Peripheral ...

The WiFi3 Click Board™ is a complete self-contained WiFi solution carrying the ESP8266 module with a system on a chip. The click is designed to run on a 3.3V power supply only. It communicates with the target board microcontroller through ...

IC/Module: HDC1000 sensor HDC1000 is a humidity measurement sensor that also performs a temperature measurement. Offering high precision measurement at low-power consumption, it measures humidity based on a novel capacitive sensor. The sensing element on the bottom part makes HDC1000 ...

The DHT22 Click Board™ is a temperature and humidity measurement board carrying the sensor of the same name. It's a low-cost reliable solution that communicates with the target board microcontroller through a single Serial Data Line. The sensor can detect ...

IC/module: MAX44000 Ambient and Infrared Proximity Sensor Combining an ambient light sensor with an integrated infrared proximity sensor, MAX44000 IC has a tiny footprint of 2mm x 2mm. The wide range and low-power consumption make the sensor an ideal option ...

The nRF S Click Board™ is a compact and easy solution for adding a 2.4 GHz transceiver to your design. It features nRF24L01P 2.4 GHz transceiver module with an embedded baseband protocol engine as well as an SMA antenna connector ...

The RTC 3 Click Board™ is based on the BQ32000, a real time clock with an integrated trickle charge circuit for automatic switchover to a backup power supply (the circuit maintains the backup charge with an onboard super capacitor). The ...