IC/Module: MCP3204 4-Channel 12-bit Analog-to-Digital Converter Microchips MCP3204 is a 12-bit resolution A/D converter programmable to provide four separate channels. It is used to convert an analog voltage signal into the appropriate 12-bit digital number. Based on low-power CMOS technology, ...

Introduce wireless communication functionality for short distances while keeping the power consumption low using the EasyBee 3 Board. The board features an IEEE 802.15.4-compliant radio transceiver module MRF24J40MA that operates in the 2.4 GHz frequency band. It also comes with ...

The STM32F207VGT6 MCU has . 120MHz frequency 1 Mbyte of Flash memory 128K + 4K bytes of general-purpose SRAM Integrated Ethernet controller USB 2.0 (OTG, Host, Device) 83 General purpose I/O pins 12x16-bit and 2x32-bit timers 3x12-bit A/D (24 channels) ...

The HP ETH MCU card is shown on Figure 1. It contains STM32F407VGT6 microcontroller with on-chip peripherals and is a great choice for both beginners and professionals. After testing and building the final program, this card can also be taken ...

TM4C123GH6PM belongs to the ARM Cortex-M4 family. It operates at 80MHz, has 256 KB of Flash memory, 32 KB of single-cycle System SRAM, USB 2.0 (OTG, Host, Device), Up to 43 General purpose I/O pins, 6x32-bit timers, 2x12-bit A/D (12 ...

The MCU card contains TM4C123GH6PZ microcontroller which is loaded with on-chip modules and is a great choice for both beginners and professionals. After testing and building the final program, this card can also be taken out of the board socket ...

EasyPIC FUSION v7 MCUcard with dsPIC33EP512MU810.

EasyPIC FUSION v7 MCUcard with dsPIC33FJ256GP710A.

EasyPIC FUSION v7 MCUcard with PIC24EP512GU810.

PIC24FJ128GA310 has 16 MIPS CPU speed, 128K bytes of program memory (flash), 8K bytes of data memory. It has LCD display controller, 85 General purpose I/O pins, 16-bit and 32-bit timers, 10/12-bit ADC (24 ch), 4 UARTs, internal 8MHz and ...

EasyPIC FUSION v7 MCUcard with PIC32MX460F512L.

PIC18F8520 microcontroller. Featuring nanoWatt technology, it has up to 10 MIPS operation, 128K bytes of linear program memory, 3840 bytes of linear data memory, and lot of internal modules.

PIC18F87J50 microcontroller. Featuring nanoWatt technology, it has up to 10 MIPS operation, 128K bytes of linear program memory, 3936 bytes of linear data memory, and lot of internal modules.

The PIC18F87J60 microcontroller is mounted on an EasyPIC PRO v7 MCU carrier board. It features IEEE 802.3 Compatible Ethernet Controller with integrated MAC and 10Base-T PHY. It supports one 10Base-T port with activity outputs for 2 LED indicators.PIC18F87J60 MicrocontrollerIt features ...

. Type LCD Display size 64x128 Characters Graphic controller NT7108 Touch Screen None Interface Parallel 8-bit Input Voltage 5V

IC/Module: MCP2120 Infrared Encoder/DecoderMCP2120 is a fully-static infrared encoder/decoder that sits between the UART side and an infrared (IR) optical transceiver. A standard UART encodes the data received and output as electrical pulses to the IR Transceiver. This data is ...

IC/Module: ULN2803A Darlington Transistor Array The ULN2803A is a high-current 8x Darlington transistor array that is capable of powering loads up to 260W in total. The open-collector output transistors have integral clamp diodes that protect them against high voltage of ...

The Accel Click Board™ is an accessory board in mikroBUS form factor. It features ADXL345 3-axis accelerometer module with ultra-low power and high resolution (13-bit) measurement, from Analog Devices. Module supports several sensing functions such as single/double tap detection, activity/inactivity ...

IC/Module: MCP2120 Infrared Encoder/Decoder MCP2120 is a low-cost, high-performance infrared encoder/decoder that sits between an IR optical transceiver and a UART. The data received from a standard UART, which is encoded (modulated) and outputted as electrical pulses to the infrared ...

IC/Module: VO2630 High Speed Optocoupler VO2630 is a dual channel 10 MBd optocoupler connected to four lines (INT, CS, RST and AN) on the mikroBUS socket. It features common mode transient immunity of 100 V/s and low input current capability ...

The Thermo Click Board™ features the MAX31855K thermocouple-to-digital converter as well as PCC-SMP connector for K-type thermocouple probes. The click is designed to run on a 3.3V power supply. It communicates with the target MCU over an SPI interface (Read-only). ...

The DALI Click Board™ from MikroE is an accessory board intended to provide Digital Addressable Lighting Interface (DALI) to your design. This board enables the user to control your home/office lighting. DALI Click Board™ is equipped with two optocouplers, push ...

The nRF C Click Board™ is an add-on board in mikroBUS form factor. It features Nordic nRF24L01P 2.4 GHz transceiver module with an embedded baseband protocol engine as well as 2.4 GHz SMD chip antenna. The board supports an air ...

The 8x8 B Click Board™ is a 64 LED matrix display Click board™, composed of SMD LEDs organized in 8 rows by 8 columns. It has a digital brightness control in 16 steps, it can control every LED in the ...