IC/Module: 74HC595 8-bit Serial-In, Parallel-Out Shift Register 74HC595 is an 8-stage serial shift register that feeds an 8-bit D-type storage register with parallel 3-state outputs. Separate clocks are provided for both the shift and storage register. Both the clocks, i.e, ...

The USB UART Click Board™ offers a USB to asynchronous serial data (UART) interface, allowing the microcontroller based designs to communicate with the personal computer, in a very simple way. It is equipped with the FT232RL, a very popular USB ...

IC/Module: MCP2210 USB-to-SPI Protocol Converter with GPIO MCP2210 is a USB-to-SPI protocol converter device with GPIO. It comprises of 256 Bytes of user EEPROM, 128 Byte buffer to handle data (64 byte transmit and 64-byte receive) and 9 GPIO pins. ...

The 8x8 Y Click Board™ is a 64 LED matrix display Click board™, composed of SMD LEDs organized in 8 rows by 8 columns. It has a digital brightness control in 16 steps, it can control every LED in the ...

The 8x8 R Click Board™ is a 64 LED matrix display Click board™, composed of SMD LEDs organized in 8 rows by 8 columns. It has a digital brightness control in 16 steps, it can control every LED in the ...

IC/Module: nRF24L01P 2.4 GHz Transceiver Module nRF24L01P is a highly integrated, ultra low-power transceiver IC for the 2.4GHz ISM band. It supports 250kbps, 1Mbps and 2Mbps on air data rates. The module provides automatic packet handling with a 1.9 to ...

The 8x8 G Click Board™ is a 64 LED matrix display Click board™, composed of SMD LEDs organized in 8 rows by 8 columns. It has a digital brightness control in 16 steps, it can control every LED in the ...

The IR Click Board™ is an add-on board in mikroBUS form factor. It's a compact and easy solution for adding infrared (IR) remote control module to your design. It features TSOP38338 IR receiver module as well as QEE113 IR emitting ...

Two Ways of Establishing Connection The user can establish a connection using male or female IDC10 connectors (provided with the package). The male IDC10 header can be soldered on the top side of Adapter Click Board™ and connected to the ...

IC/Module: CY8C201A0 Slider Capacitive Controller CY8C201A0 IC is a capacitive sensing core with two buttons and a capacitive slider. It shows high immunity to RF and AC noise and features control registers with non-volatile storage. The standard I2C serial communication ...

Besides the unique technology used for the data storage, this device kept the backward compatibility, in sense of communication and operation. Offering these advanced features, as well as a range of standard features found on most EEPROM or FLASH modules, ...

IC/Module: MPL3115A2 Digital Pressure Sensor MPL3115A2 is a fully internally compensated MEMS pressure sensor that communicates via I2C interface to deliver precise Pressure/Altitude and Temperature data. It provides digitized output using a 24-bit ADC. The resolution is down to 30 ...

The PS/2 Click Board™ is a cost-effective solution for adding keyboard and mouse connectivity to your design. It features a standard 6-pin Mini-DIN PS/2 connector, a mikroBUS™ host socket, and a power indicator LED. PS/2 click communicates with the target ...

The Alcohol Click Board™ has a high sensitivity to alcohol and it can be used to detect alcohol in concentrations from 0.04 to 4mg/l. Alcohol click carries an MQ-3 Semiconductor sensor for alcohol. The click is designed to run on ...

LPG sensor: MQ-5 MQ-5 liquefied petroleum gas sensor has a fast response time and output is an analog resistance. It is also highly sensitive to natural gas and town gas. The sensor requires to be preheated for accurate calibration, and ...

The Motion Click Board™ is a motion detector sensitive only to live bodies. It carries PIR500B, a pyroelectric sensor. The click is designed to run on 3.3V power supply only. It communicates with the target MCU over RST and INT ...

Carbon Monoxide (CO) Sensor: MQ-7 The MQ-7 sensor has high sensitivity to carbon monoxide. The gas sensing layer on the sensor unit is made of Tin dioxide (SnO2), which has lower conductivity in clean air. The conductivity increases as the ...

Methane (CH4) sensor: MQ-4 MQ-4 methane sensor has a fast response time and output is an analog resistance. The sensor requires to be preheated for accurate calibration. It takes more than 24 hours for the sensor to reach the right ...

MQ-8 Sensor The Hydrogen Click Board™ is based on the MQ-8 sensor features a gas sensing layer constructed of tin dioxide which is an inorganic compound with the formula SnO2. Tin dioxide is known to have lower conductivity in clean ...

The Air Quality Click Board™ is a simple solution for adding a high sensitivity sensor for detecting a variety of gases that impact air quality in homes and offices. It carries an MQ-135 sensor. The click is designed to run ...

The Bi Hall Click Board™ is a simple solution for adding a bipolar Hall switch to your design. It carries the Melexis US2882 bipolar Hall-effect switch and a 74LVC1T45 single bit, dual supply transceiver. A bipolar Hall effect sensor is ...

IC/Module: Melexis US5881 Unipolar Hall-Effect Switch A unipolar Hall-effect switch, the CMOS-technology based Melexis US5881 integrates a voltage regulator, Hall sensor with dynamic offset cancellation system, Schmitt trigger and an open-drain output driver, all in a single package. It is ...

IC/Module: MLX90242 Linear Hall Sensor IC Melexis MLX90242 is a CMOS linear Hall Effect sensor IC with integrated active error correction circuitry that virtually eliminates the offset errors normally associated with analog hall-effect devices. Output Proportional to Density of the ...