The BBF SO16W Test Clip is used to connect the Backup Boot Flash Tool to the Main Serial Flash soldered on board offering the possibility to the application controller to work on the Backup Flash automatically without the need of ...

ISP-ADP-127 Cable Adaptor is used to connect SF100 pinout (2.54mm 2x7) to 1.27mm pin header (SO8) soldered on the application. SF100 1.27mm 2x4 Header Pin Out 1 Vcc GND 2 3 CS CLK 4 5 MISO MOSI 6 7 Vpp/Acc ...

This straight GSM/GPRS Magnetic Antenna is an excellent choice for GSM/GPRS Click Boards™ from our offer. The antenna has a magnetic base so it can be attached to any metal surface. It is equipped with 2m of cable, with an ...

The MIC23099 Click Board™ carries the MIC23099, a single AA/AAA cell step-down/step-up regulator with battery monitoring. The Click Board™ is designed to run on a 3.3V power supply. It communicates with the target microcontroller over the following pins on the ...

The Thermostat 2 Click Board™ is a general-purpose thermostat Click Board™ designed to be used with any temperature sensor based on the DS1820 sensor design: 3-pin package with a 1-Wire® communication interface. The Click Board™ is equipped with a 3-pole ...

Enhance your automotive and industrial applications with the CAN FD 6 Click Board™. This compact add-on board integrates a high-performance CAN transceiver supporting Controller Area Network (CAN) and Controller Area Network Flexible Data-Rate (CAN FD) protocols. Developed with the TCAN4550 ...

The MikroMedia™ 7 for STM32 Shield is the perfect way to expand the functionalities of your mikroMedia™ 7 for STM32F4 and mikroMedia™ 7 for STM32F7 with five mikroBUS sockets - add any functionality from our ever-growing range of Click Boards™. ...

The mikroMedia™ HMI Breakout Board is a simple accessory that conveniently enables developers to access pins from any of the 18 mikroMedia™ HMI smart display boards.

The MINI-32 for PIC32MZ is a small PIC32 development board containing the PIC32MZ microcontroller (1 MB Live-Update Flash and 512 KB SRAM) with FPU from Microchip.This compact and powerful development board is designed to work as a standalone device or ...

The NFC USB Dongle is an NFC Reader-Writer based on NXP's PN7150 high-performance complete NFC controller, supporting all NFC Forum modes. The USB NFC Dongle is powered through the USB connector. This NFC controller supports all NFC Forum communication modes ...

The Piezo Accel Click Board™ is a compact add-on board containing an acceleration sensor based on PE technology. This board features the 820M1-0025, a piezoelectric accelerometer designed for embedded condition monitoring and preventive maintenance applications from TE Connectivity. This accelerometer ...

The Raspberry Pi Click Board™ Shield is an expansion board for the popular Raspberry Pi mini-computer. This simple shield carries a MikroBUS host socket that makes your Raspberry Pi compatible with more than 1100 different Click Boards™. Ranging from commonly ...

The Tag Connect TC2030-IDC-NL-10 is a 6-Pin, 10" (254mm) No-Legs Cable with a Ribbon connector.

The Tag Connect TC2030-MCP-NL Cable is 152mm (6") long, as Microchip recommends for PIC debugging applications.

TC2070 14-pin Plug-of-Nails™ (with legs) to 14 pin 2mm female IDC connector.

The 3D Hall 9 Click Board™ is a compact add-on board used to detect the strength of a magnetic field in all three dimensions. This board features the ALS31300, a 3D linear Hall-effect sensor with digital output and advanced low ...