Bluetooth Interface for Windows PCs, specifically designed for use with the Hantek-365E and Hantek-365F data loggers.

The Click Board™ USB Adapter board provides the necessary interface for connecting Click Board™ add-on boards to your PC through the USB connection. It features FT2232H dual high-speed USB to multipurpose IC, AD converter, EEPROM memory and mikroBUS host socket.

Single-use adhesive ECG/EMG electrode (48 X 34mm) with stud adapter. Pack of 30 pieces.

The Hantek HT2018BX Battery tester is designed for testing the condition of automotive lead-acid batteries. The tester exercises the battery under the following conditions and measures the following results: The Starting Process - High Current Load The Charging Process Normal ...

The Microphone AMP Board is an accessory board that amplifies audio signals detected by the microphone provided on-board. The microphone is connected to an LM4864 audio power amplifier that works well for use in low-voltage consumer applications. The detected audio ...

The 4-20mA T Click Board™ from MikroE is an accessory board to provide an easy solution to add 4-to-20mA industry-standard communication protocol to the user design. Offered in a small package, this Click Board™ is intended to serve as a ...

The 4-20mA R Click Board™ from MikroE is an accessory board that provides a simple solution to add 4-20mA industry-standard communication protocol to your design. Offered in a compact package, this Click Board™ is intended to serve as a receiver ...

Embed your design with a two-digit green 14-segment alphanumeric display using the AlphaNum G Click Board™. The Click Board™ features two TLC5926 16-bit constant-current LED sink drivers. It contains a 16-bit shift register and data latches, which convert serial input ...

Embed your design with a two-digit red 14-segment alphanumeric display using the AlphaNum R Click Board™. The Click Board™ features two TLC5926 16-bit constant-current LED sink drivers. It contains a 16-bit shift register and data latches, which convert serial input ...

The 7-Seg RGB Click Board™ carries a full-colour single 7-segment digit display. The click is designed to run on a 3.3V or 5V power supply. It communicates with the target microcontroller over the CS, and PWM pin on the mikroBUS™ ...

The PIXI™ Click Board™ is equipped with the MAX11300 IC from Maxim Integrated, which features Maxim Integrated's versatile, proprietary PIXI Technology - it is the industry's first configurable 20-channel mixed-signal data converter. Besides the 12-bit multi-channel SAR ADC and buffered ...

Enhance your projects with the versatile and innovative 10x10 RGB Click Board™. This matrix of 100 RGB elements, arranged in a 10x10 configuration, offers a dynamic display screen for your creative endeavors. The 10x10 RGB Click Board™ features intelligent RGB ...

The Raspberry Pi Click Board™ Shield is an extension for the Raspberry Pi®, the low-cost mini-computer. It's a simple shield with a mikroBUS host socket to make your Raspberry Pi compatible with more than 1100 different types of Click Boards™. ...

Designed to meet the demands of Raspberry Pi enthusiasts for better audio output, the RaspyPlay4 is a highly functional and innovative add-on board that connects directly to the Raspberry Pi (model B+ onward) using the 40-pin GPIO header. The RaspPlay4 ...

Ideal for both debugging and production programming of SAM ARM Cortex MCUs using the Microchip PICkit 4 or SNAP in-circuit debuggers, the 6 pin plug-of-nails™ ‘no-legs’ cable terminates in a 8 pin 0.1″ male SIP strip for connection to the ...

10-pin Plug-of-Nails™ “With Legs” connector to 20-pin 0.050″ pitch ribbon connector suitable for ULINK2 and similar debuggers that use the Samtec FTSH-110-01 style micro-header.

Introducing the Total Phase Beagle USB 480 Analyser: Your High-Speed USB 2.0 Bus Monitor Revolutionize your USB monitoring experience with the advanced capabilities of the Total Phase Beagle USB 480 Analyser. Designed to provide non-intrusive analysis of high-speed USB-bus states ...