The LOC HP/CCI is made to easily interface ChipShop polymer or glass microfluidic chips with your pumps and devices. The holder creates a tight sealing with mini Luer or thru-hole ports in your chip to ensure reliable connections within your ...
The NEW Reglo Peristaltic Pumps deliver the technical precision that is synonymous with Masterflex® and Ismatec® combined to form the first highly accurate, low-flow (from 0.0001 up to 68 mL/min), MasterflexLive®-enabled, and 21 CFR Part 11 and EU Annex 11 ...
Combining the experience of Masterflex® and Ismatec®, the new Reglo Digital Miniflex® Peristaltic Pump provides you with a connected, intuitive, powerful, and secure fluid handling experience. This is the first highly accurate, low-flow (from 0.004 up to 365 mL/min), MasterflexLive®-enabled, ...
The 10-32 Female to 1/4-28 Male Adapter made in biocompatible PEEK is perfect to connect different threads. Its configuration allows to connect a 10-32 coned fitting to a 1/4-28 flat-bottom port. General This adapter allows you to connect perfectly a ...
Sensirion LG16 liquid flow sensor is a high-precision solution to accurately measure very low flow rates of liquids based on water or hydrocarbons. Its wide flow range, its short response time of 40 ms, and sensitivity down to < 0.02 ...
A connector to directly interface a Memetis valve with any soft-walled tubing. Manufactured in PEEK. General Connect any Memetis valve to your soft-walled tubing. Content 1x Tube connector for Memetis valve The valve is not included. Specifications Material PEEK Connection ...
Sensirion SLF3S-0600F and SLF3S-1300F liquid flow sensors are natively integrated with the Bartels environment. Just connect the sensor to the Multiboard2, and start monitoring your flow rate easily! Available in 2 versions according to the flow range: 0-2000 µL/min or ...
The Fluo-ST2 surface treatment from Emulseo is a fluorophilic surface coating agent to increase the performance and stability of aqueous droplets in fluorinated oils. Supplied in a vial, volume of 8 mL. General Fluo-ST2 is a solution of fluorosilane polymer ...
A laboratory peristaltic pump to cover a wide range of applications, from 2 µL/min to 366.7 mL/min. This is the updated version of the BT100-2J. You can choose between two pump head types depending on the required flow rate. Silicone ...
These tubing stops are made to quickly add stoppers to any peristaltic tubing. They are the best solution to get sterilizable custom tubing with stoppers, or longer tubing sets. Pack of 20 units. General Quickly and easily make a custom ...
NanoTight sleeves are designed to adapt 630 to 670 µm OD tubing to 1/16" OD connectors. Carefully manufactured in highly-inert FEP fluoropolymer (an excellent alternative to PTFE), they fit perfectly to NanoTight and flangeless fittings. General Seamlessly connect 630-670 µm ...
These conical adapters connect capillary peristaltic tubing to standard 1/16" OD tubing. The adapter accommodates peristaltic tubing IDs from 0.020” (0.50 mm) to 0.030” (0.75 mm). General This conical adapter provides a safe connection between capillary soft-walled (peristaltic, silicone, Tygon) ...
A kit of PEEK fittings for connecting 1/16" OD rigid tubing with 10-32 threaded ports. These fittings are reusable and can be used for the distribution of both liquids and pneumatic pressure (i.e. from a pressure source). General Connect 1/16″ ...
Bartels mp-Driver controller is a compact pump driver for mp6 micropumps. It enables integration into system electronics or on a PCB. Pump parameters can also be adjusted easily (frequency, amplitude, signal shape) using the mp-Multiboard2 evaluation board. General The mp-Driver ...
Honeywell ABP digital pressure sensor with cable for Bartels Multiboard2. Pressure range from 0 to 15 psi (0 to 1 bar), accuracy of 0.25% (see documentation). General Honeywell ABP series are piezoelectric silicone pressure sensors offering enhanced accuracy over a ...
The Harvard Apparatus Pump Controller (HAPC) is a standalone controller for the operation of up to four pumping channels, either separately or simultaneously. Through its touch screen interface, the HAPC provides accurate feedback on the status of each pump and ...
These storage boxes are designed to keep your microfluidic chips safe. They hold chips in the format of microscopy slides (25.5 mm x 75.5 mm). Two sizes of boxes are available, to store from 5 to 20 chips. General These ...
A 15 m roll of platinum-cured silicone tubing for general lab applications and peristaltic pumping. Translucent, ultra-smooth inner bore and wide chemical compatibility. Available in various sizes, from 0.5 mm to 9.6 mm ID. General The LongerPump platinum-cured silicone tubing ...
A 15 m roll of Biosicon high-performance and biocompatible tubing, designed and manufactured for GMP pharmaceutical and life science applications. This platinum-cured silicone tubing meets USP Class VI and FDA standards for high-quality fluid transfers. Available in various sizes, from ...
Peristaltic tubing in platinum-cured silicone for various applications. Three stoppers are glued on each tube to be used with LongerPump DG series peristaltic pump heads. Ultra smooth and biocompatible for the most demanding bioprocess applications. Each pack includes 12 units ...
These handling frames are designed to easily interface your ChipShop microfluidic chips. They are compatible with standard inserts for SBS microtiter plates. They exist in plastic or aluminum. For the plastic frames, two heights of skirts are available: high or ...
The Double-Sided Adhesive Tape Rings by Microfluidic ChipShop are designed to securely bond ChipShop connectors to their microfluidic chips. Sold in packs of 10 adhesive rings. General These adhesive rings are designed to easily glue ChipShop microfluidic connectors to microfluidic ...
These Fluidic 1230 flat caps seal female Mini Luer interfaces. Sold in packs of 10 caps. General These TPE caps allow sealing Mini Luer interfaces with a minimal footprint. Content 10x Female mini Luer flat caps Specifications
These Fluidic 1231 flat caps are made to seal female Luer interfaces. Sold in packs of 10 caps. General These TPE caps allow sealing Luer interfaces without additional height to the microfluidic system hence with a minimal footprint. Content 10x ...
