The threaded adapter assembly made in biocompatible PEEK is perfect to connect different threads. Its configuration allows a perfect connection between a female 10-32 coned to female 1/4-28 flat-bottom. Included fitting accepts 1/16" OD tubing. General This adapter ensures a ...
Sensirion SLS liquid flow sensor is a high-precision standalone solution for flow rates of up to 40 mL/min. Its wide flow range and short response time down to 20 ms make it a reliable flow sensor when versatility in the ...
The SLI Flow Meter Kit is meant to provide you with a complete setup, including an SLI sensor and a complete set of accessories to evaluate its performance. Monitor your flow rate using the Windows software, and export your data ...
A pack of 3 focused flow (or flow focusing) droplet generators in glass with sideconnect interface to be used with the Sideconnect chip holder. Available uncoated (hydrophilic) or with a hydrophobic coating, and nozzle sizes of 10 µm, 50 µm ...
A set of 5x ferrules to connect your 1/16" OD tubing to the Sideconnect chip holder from Micronit. General Manufactured in FFKM, these ferrules offer the following advantages: Compatible with 1/16" OD tubing and Sideconnect chip holder Reusable Excellent chemical ...
The Sideconnect chip holder is designed to quickly interface sideconnect chips. This holder is compatible with inverted and upright microscopes. General Quickly connect your sideconnect chip to your microfluidic system using this Sideconnect chip holder. With lateral chip-tubing connection ports, ...
Making droplets has never been easier with the Elveflow Microfluidic Droplet Pack! Based on the high-precision OB1 Mk3+ pressure controller, this bundle includes everything you need to generate monodisperse droplets out-of-the-box. The Droplet Pack is completed by a user guide ...
A pack of Y connectors in polypropylene to connect your soft-walled tubes to the rest of your system. Available in a pack of 10 units, for tubing ID sizes of 1/16" (1.6 mm), 3/32" (2.4 mm) or 1/8" (3.2 mm). ...
A pack of straight connectors in polypropylene to connect your soft-walled tubes to the rest of your system. Available in a pack of 10 units, for tubing ID sizes of 1/16" (1.6 mm), 3/32" (2.4 mm), 1/8" (3.2 mm), 5/32" ...
A pack of straight reducers in polypropylene to interface two soft-walled tubes of different sizes. Available in a pack of 10 or 25 units, for tubing ID sizes from 1/16" (1.6 mm) to 3/16" (4.8 mm). General Masterflex reducers are ...
A pack of T connectors in polypropylene to connect your soft-walled tubes to the rest of your system. Available in a pack of 10 units (1/16", 3/32") or 25 units (1/8"), for tubing ID sizes of 1/16" (1.6 mm), 3/32" ...
The mp-basic Evaluation Set is the easiest and most efficient way to try out Bartels micropumps. It includes the mp-Multiboard2 which can be operated simply from the provided software. The set contains the following: 1x mp-Multiboard2 controller with 3 driver ...
Compatible Tygon tubing for mp6 micropumps. Tubing ID of 1.3 mm. General A transparent Tygon tubing of 1.3 mm x 3 mm (ID x OD), sterilizable by autoclave or EtO. Specifications Tubing ID 1.30 mm Material Tygon LMT-55 Length 1 ...
A bubble trap to remove bubbles from water-based solutions while using Bartels micropumps. General Remove bubbles from your flow stream using Bartels micropumps. The bubble trap must be used with a Bartels mp6 pump, connected to the air outlet. Content ...
A shape-memory alloy valve from Takasago, fully integrated with the Bartels Multiboard2 system (with the mp-valvedriverT). General Takasago SMV is an almost-silent and low-power 2/2 normally closed valve, controllable through the Bartels Multiboard2. Use the mp-valvedriverT with this valve to ...
Use the mp-valvedriver to control the Takasago SMV-2R-BN1F from the Multiboard. General The mp-valvedriverT is a driver used to control Takasago SMV-2R-BN1F valves on the Bartels Multiboard and Multiboard2. Use of this driver is mandatory to control the valve from ...
A mounting frame for mp6 micropumps. General Insert an mp6 micropump in this mounting frame to easily fix the pump in your integrated system. Content 1x mp-mf mounting frame for mp6 micropumps Specifications Dimensions 33 x 18 x 4 mm ...
Molex connectors for custom-made cabling of Bartels mp6 micropumps. Pack of 10 units. General Connect any mp6 micropump to your control board with these Molex connectors. Content 10x mp-mol Molex connectors Specifications Connector Molex FCC 39532045 1.25 mm pitch Contacts ...
Heat your syringes and control their temperature up to 185 °C! This kit includes a control unit and a primary syringe heater pad to heat one syringe. Available in two versions: 1LG (9 x 7.5 cm / 3.5" x 3.0") ...
Additional heating pads, to be used with the Syringe Heater Kit. Available in two versions: 1LG (9 x 7.5 cm / 3.5" x 3.0") or 5SP (50 x 1.5 cm / 20" x 0.625"). General Heat multiple syringes from one ...
Step-down transformer from 220V to 110V, used with the New Era Heating Kit. General A step-down transformer to be used with the Heating Kit from New Era in countries where the voltage is above 120V.
PTFE or Teflon is widely used in microfluidic experiments due to its excellent solvent resistance, higher continuous service temperature, and superior polymer purity. 30 m Teflon PTFE tubing with 1/32" (0.76 mm) OD and 0.30 mm ID for your daily ...
The Fluidic 997 Male Mini Luer Tube Tuck Connector by Microfluidic ChipShop enables direct insertion of 1/32" OD rigid tubing (PTFE, PEEK, etc.) for a dependable connection with ChipShop mini Luer chips. PEEK capillary tubing is recommended (1/32" OD x ...
Quickly connect two Luer ports with this male-to-male Luer connector. Pack of 10 units. General Manufactured in PP, this simple adapter is designed to connect two female Luer devices together. Robust and reusable, it can be used in any low-pressure ...
