Fastec HS7 camera is the fastest camera from the HS series, designed for the applications where both resolution and speed are required. Using a 10-bit CMOS sensor, the new HS7 allows recording videos in Full HD (1920 x 1080) at ...
Control any HS, IL or TS camera from Fastec. Comprising an Intel 8th Gen i5 processor, 16GB of internal memory and a 512GB high-speed storage, the HS controller eliminates the need for a dedicated computer. FasMotion software is pre-loaded, allowing ...
This PEEK elbow connector is designed to be used in tight corners. Pack of 1 elbow connector with 2x flangeless PEEK fittings for 1/16" OD or 1/8" OD tubing. General Elbow connectors manufactured in biocompatible PEEK, resistant to a wide ...
These double wing Fingertight fittings comprise a nut and a ferrule, manufactured in PEEK, for 1/16" OD tubing. Available in a pack of 10 units. General Fingertight fitting with a winged nut head to provide extra leverage when tightening it ...
Fingertight ferrules in PEEK for 1/16" OD tubing. Use these ferrules with Fingertight 10-32 coned nuts. Available in a pack of 10 units. General Connect your 1/16" (1.6 mm) OD tubing to a 10-32 coned port using a Fingertight nut ...
Flangeless ferrules for 1/4-28 UNF flat-bottom ports, made to connect 2.5 mm OD tubing. Manufactured in ETFE. Available in a pack of 10 units. General Connect your 2.5 mm OD rigid or semi-rigid tubing to any 1/4-28 flat-bottom port. Use ...
Manufactured in PEEK, these 6-40 flat-bottom plugs are perfect for closing off unused ports in valves and multi-port connectors. Sold by pack of 10 units. General Close off unused 6-40 flat-bottom ports using these plugs. Manufactured in biocompatible PEEK, they ...
PEEK 1/4-28 female flat-bottom to 10-32 coned male adapters are made to connect a 1/4-28 fitting in a 10-32 port. Pack of 5 units. General This adapter allows you to connect a 1/4-28 flat-bottom fitting to a 10-32 coned. Manufactured ...
PEEK 1/4-28 female flat-bottom to 10-32 male flat-bottom adapter, to interface a 1/4-28 nut with a 10-32 port. General This adapter allows you to connect a 1/4-28 flat-bottom fitting to a 10-32 flat-bottom port. Manufactured in PEEK for complete biocompatibility. ...
Inline filters are used to prevent your microfluidic chip from being clogged because of particles in your liquids. These filters, manufactured in PEEK, are fully biocompatible and can be mounted directly in your flow stream. Filter pore size of 0.5 ...
This 10-32 x 10-32 non-metallic check valve protects against backflows. Broad chemical resistance and biocompatibility are guaranteed by the PEEK polymer and fluoroelastomer construction. The low cracking pressure (0.07 bar) is ideal for microfluidics. Pack of 1 unit. General Limit ...
A comprehensive assortment box of all the useful connectors with 1/4-28 standard ports. General Our team of experts in microfluidics has designed this kit to simplify your daily research! This kit includes various types of connectors to interface your chips ...
PFA tubing for general lab applications. Roll of 20 meters, available in various sizes. General PFA tubing is widely used in microfluidics as an alternative to PTFE. It combines the properties of PTFE and FEP, with high transparency. Various sizes ...
Sensirion LS32-1500 liquid flow sensor is a high-precision solution for flow rates of up to 40 mL/min. Its wide flow range, its short response time down to 20 ms, and its compact format for easy integration make it a reliable ...
Connect your standalone Sensirion sensor (SLQ, SLI, SLS, SLG) to your computer or any integrated system. This cable has an M8 end to connect your sensor, and USB or pigtail. General The SCC1 cable allows simple and quick readouts of ...
A pack of 5 ferrules to connect your 1/32" OD tubing to the Fluidic Connect Pro chip holder from Micronit. General Use these ferrules to interface your 1/32" OD fluoropolymer tubing (PTFE, ETFE, PEEK, etc.) to the Fluidic Connect Pro ...
A pack of 5 ferrules to connect your 1/16" OD tubing to the Fluidic Connect Pro chip holder from Micronit. General Use these ferrules to interface your 1/16" OD stainless steel or fluoropolymer tubing (PTFE, ETFE, PEEK, etc.) to the ...
A pack of 3 enhanced oil recovery (EOR) chips with topconnect interface to be used with the Micronit Fluidic Connect Pro chip holder. This chip is used to verify calculation models by providing an optically clear rock model with known ...
A kit containing 5x ferrules for 1/16" OD tubing and 5m ETFE tubing to create a secure connection between your pump and the Fluidic Connect Pro chip holder from Micronit. General Use this kit with your Fluidic Connect Pro chip ...
The Fluidic Connect Pro is the most advanced chip holder from Micronit, compatible with any topconnect microfluidic chip. General Fluidic Connect Pro is a user-friendly chip holder for Micronit chips with a topconnect interface. The Load'n'Seal design and special ferrules ...
A pack of Luer Slip to barb adapters in polypropylene to connect any Luer Female port to a soft-walled tubing. Available in a pack of 25 units, for tubing ID sizes of 1/16" (1.6 mm), 3/32" (2.4 mm) or 1/8" ...
A pack of Luer Lock to barb adapters in polypropylene to connect any Luer Female port to a soft-walled tubing. Available in a pack of 25 units, for tubing ID sizes of 1/16" (1.6 mm), 3/32" (2.4 mm), or 1/8" ...
A pack of 10-32 UNF to Luer adapters in Nylon. Pack of 25 units. General 10-32 UNF to Luer adapters allow for easy interfacing between two port types. Manufactured in Nylon, these connectors can be sterilized using ethylene oxide, gamma ...
Memetis ECU-S is a simple control unit for quick evaluation of Memetis valves. General Memetis ECU-S is the ideal controller to control the Memetis valves. It is available in 2 versions: NC Valve: control one 2/2 NC Memetis valve Bistable: ...
