This is the spoke wrenche that I use when truing most Mavic wheels (2011 and newer). This alloy star shaped Mavic spoke wrench is to be used with the the "New M7" spoke nipple which is specifically for the newest ...

This end cap fits some Pre-2013 Mavic rear axles, mainly rear hubs using Center Lock design. Make sure that you check compatibility before ordering. Mavic Part #: 32389001

These are black butted aero steel straight pull spokes with aluminum spoke nipples and washers are for the following wheels: 2016 Cosmic Pro Carbon SL C 2017 Cosmic Pro Carbon SL C Part Number Position Length Color V2271001 Front 271mm ...

Mavic Crossmax SX Disc front rim is compatible with the following wheels:2009 Crossmax SX Disc2010 Crossmax SX Disc2011 Crossmax SX Disc Again, this rim is GREY, and has the FORE drilling. Front rim is 24 hole. Mavic Part #: Rear: ...

This is, to quote Mavic, "Expansible Bearings Support" parts for Crossmax Enduro Disc, Crossride Disc, Speedcity, Cosmic Elite and others. Sold as pairs.Mavic Part #: 323 484 01

This is the internal spacer that sits between the freehub and the bearing on most FTS-L and FTS-X Mavic rear hubs. Mavic Part Number: M40067 Not compatible with the new ID360 system.

These are Mavic front axle adapters to convert your 20x110mm thru axle front hub to 9x100mm (QR). For Crossline 09, Deemax 09, Deetraks 09, Crossmax SX, ST, and others. Fit 2009-2011 hubs. Mavic Part Number: 995 039 01

Mavic ITS-4 XD freehub body needed to make your Mavic ITS-4 wheel compatible with SRAM XX1 cassettes. Compatible with SRAM XD cassettes only. Includes Driver, Seal and two XD end caps.Instant Transfer System 4 (ITS-4)Using 4 pawls working 2 by ...

These silver bladed, stainless steel, straight pull spokes with integrated M7 nipple are for the following wheels: 2006 Ksyrium Elite 700c & 650c700cSpoke Lengths:Front: 287mmRear: 307mmMavic Part #'s:Front: 323 898 01Rear: 323 899 01 Front: 324 184 01 (Black) Rear: ...

These are bladed, straight pull, stainless steel, spokes. It comes with a nipple if I have them. These spokes fit the following wheels: 2008+ Ksyrium Equipe Black/Silver

These are black stainless steel butted aero spokes and include aluminum nipple and washer. These spoke fit the following wheels (and more): 2017+ Ksyrium Pro Carbon SL C Attention: V2274201, V3663801, and V2277601 are the same spokes.

Mavic Ksyrium SL clincher rim is compatible with the following wheels:2006 Ksyrium ES (Not the same ES graphics)2008 Ksyrium SL2008 Ksyrium SL Premium2009 Ksyrium SL2010 Ksyrium SL 2010 Ksyrium SL BlackAgain, this rim is black, has the FORE drilling. Front ...

These are genuine bearings sourced by Mavic. NOT cheap Chinese counterfeits. Remember that you get what you pay for. This bearing set is used in quite a few Mavic front wheels, including but not limited to some Ksyrium Elite, Equipe, ...

This is the Mavic axle assembly for 2013-2016 R-SYS SLR rear hubs. Mavic Part #: V2250101 Old Mavic Part # 329 886 01

This is the drive side axle bolt/screw that fits several Mavic MTB rear hubs including but not limited to 2008 C29SSMAX and Crossmax ST Disc. Mavic Part #: 324 129 01

These are Mavic QRM Auto rear axle adapters 9x135 (QR). These are for hubs with Instant Drive 360 (ID360) freehub bodies. Mavic Part Number: V2510801

This Freehub body is for ID360 MTB hub using SRAM XD MTB cassettes. Seal is not included. If you need to replace the seal, you can find them here. Insta Drive 360 (ID360) Part #: V3740101

This kit includes 2- 40T Ratchets, spring, grease and pad and is used in Mavic ID360 MTB rear hubs. Part numbers: LV2372800 / V2372801

These spokes fit the following wheels: 2011+ CrossTrail Disc Part Numbers: Front and Non-Drive Side: 12034101 Drive Side: 12034201 Spoke Lenghts: Front and Non-drive side: 267mm Drive Side: 265mm

This is a pair of Mavic multi-tools which function as new M7 spoke wrenches, hub adjustment wrench, and tire levers. These are, in my opinion, the best tire levers available because of the thinness and the material. Mavic part #: ...

This Mavic rear hub auto adjusting play kit is used in many of Mavic's QRM rear axles. Mavic part #: V2370401

These are black butted aero steel straight pull spokes with aluminum spoke nipples and washers are for the following wheels: Attention: V3663801, V2274201, and V2277601 are the SAME spokes. 2017+ Cosmic Pro Carbon SL T Part Number Position Length Color ...

These are bladed, straight pull, stainless steel, round head spokes. Comes with a nipple. These spokes fit the following wheels: 2015+ Aksium Elite

These black, round, stainless steel, straight pull spokes with nipples are for the following wheels: 2019+ Allroad Disc .tg {border-collapse:collapse;border-spacing:0;} .tg td{border-color:black;border-style:solid;border-width:1px;font-family:Arial, sans-serif;font-size:14px; overflow:hidden;padding:10px 5px;word-break:normal;} .tg th{border-color:black;border-style:solid;border-width:1px;font-family:Arial, sans-serif;font-size:14px; font-weight:normal;overflow:hidden;padding:10px 5px;word-break:normal;} .tg .tg-vyeb{background-color:#ffe503;font-family:inherit;font-weight:bold;text-align:center;vertical-align:top} .tg .tg-ffby{background-color:#ffe503;font-weight:bold;text-align:center;v...