This is technical grade light mineral oil that is recommended by Mavic to be used to internally lubricate the freehub body, seal, as well as the pawls and springs.

These are genuine bearings sourced by Mavic. NOT cheap Chinese counterfeits. Remember that you get what you pay for. This bearing set includes two bearings. This set is used in quite a few Mavic front disc road and MTB wheels, ...

This end cap fits some Pre-2012 Mavic rear axles. Make sure that you check compatibility before ordering. Mavic Part #: M40676

These are black swaged bladed steel straight pull spokes with integrated aluminum Fore nipples. They are for the following wheels: 2014 Cosmic Carbone 40 Clincher 2015 Cosmic Carbone 40 Elite 2016+ Cosmic Carbone 40 T

These are black swaged bladed steel straight pull spokes with ABS type spoke nipples are for the following wheels: 2011 Cosmic Carbone SL 2012 Cosmic Carbone SLE Spoke Lengths:Front: 289mm Drive Side: 306mm Non-Drive Side: 288mmMavic Part #'s: Front: 996 ...

These are black swaged bladed steel straight pull spokes with ABS type spoke nipples are for the following wheels: 2014 Cosmic Carbone SLS 2016 Cosmic Pro Carbon Spoke Lengths:Front and Non-Drive Side: 289mmDrive Side: 287mmMavic Part #'s: Front and Non-Drive ...

This rear axle kit is used in several 2012 and newer Mavic MTB rear hubs including but not limited to: Crossmax ST Disc Crossmax SX Disc Crossmax SLR Disc Crossmax ST 29 Crossmax SLR 29 Crossmax Enduro WTS 26Crossmax Enduro ...

These are black, bladed, straight pull Zicral spokes with integrated self-locking New M7 (6.4mm) nipples and are for the following wheels: 2014-15 Crossmax Enduro WTS 262015 Crossmax XL WTS 26

These are straight pull, round, grey Zircal spokes with integrated M7 (5.5mm)nipples. These spokes fit the following wheels:Crossmax SX Crossmax SX 09 (INT + Centerlock)

These are black, ROUND straight pull Zicral spokes with integrated M7 (5.5mm) nipples. They are for the following wheels:2003+ Crossmax XL DISC 2003+ Crossmax XL Rim brake: Very limited availability. Mavic is out of stock, and this spoke is out ...

This is the Mavic Freehub body seal and single dose of grease for ID360 hubs. Mavic Part Numbers: LV2251600 / V2251601 Not compatible with the FTS-L system.

These silver or black, bladed, stainless steel, straight pull spokes with integrated M7 nipples (5.5mm M7) are used in the following wheels: 2009 Ksyrium Elite 700c2010 Ksyrium Elite 700c Part Number Position Length Color 99685601 Front 284mm Black 99685701 Drive ...

This MTB rear axle parts kit is used in Mavic Crossride and Crosstrail Disc rear wheels. See exploded view for what is included.Mavic Part #: 32348001

This rear axle assemble fits the following Mavic rear wheels: 2014 Cosmic Elite S 2014 Aksium S 2013 Ksyrium Equipe S 2012 Aksium 2011- 2016 Cosmic Elite 2011 Ksyrium Equipe 2010 Aksium 2008 Ksyrium Equipe Mavic Part #: 996 039 ...

This is the Mavic axle assembly for 2013-14 Ksyrium SLR and R-SYS (NOT R-SYS SLR)rear hubs. Old Mavic Part #: 32999901 New Mavic Part #: V2250201

These axle end supports are used on several Mavic road hubs including but not limited to Ksyrium SL, SLR, SLS, R-SYS (2013), Ksyrium Elite S (2013).Sold as a pair.Mavic Part #: 351 173 01

This is where you will find spokes for your older (pre-2008) Mavic mountain wheels that are not listed anywhere else on this site. These have long been discontinued by Mavic and because of this, quantities are limited. I will include ...

These are genuine bearings sourced by Mavic. NOT cheap Chinese counterfeits. Remember that you get what you pay for. This is a Mavic ID360 small-bearing kit. This bearing set includes two bearings: (28 X 17 X 7) and (26 X ...

This tool is what I use as an alternative to the Mavic spoke tools when I need a little more leverage on some of the stubborn M7 nipples. The SW-12 fits the "new M7" nipples (6.4mm) that are used on ...

This tool is what I use as an alternative to the Mavic spoke tools when I need a little more leverage on some of the stubborn M7 nipples. The SW-13 fits the pre-2011 M6 nipples (5.5mm) that are used on ...

These are Black, bladed, straight-pull Zicral spokes with integrated self-locking New M7 (6.4mm) nipples. They are used in the following wheels and others: 2019+ Deemax Pro 292020 Deemax Pro Sam Hill 29 Front and Non-Drive Side spokes can also be ...

These black, Ultra-Flat bladed, stainless steel, straight pull spokes with integrated "NEW M7"(6.4mm) GREY nipples are for the following wheels: 2018-2020 Ksyrium Elite Part Number Position Length Color V2277801 Front 286mm Black V2277901 Drive side 275mm Black V2278001 Non-drive side ...

These Zicral, bladed spokes with integrated new M7 nipples are used in 2018-20 Ksyrium Pro UST wheels. Front: V2277701 Drive side: V2270501 Non-drive side: 10844701 Lengths: Front: 285.5mm Drive side: 273.5mm Non-drive side: 298mm

This Freehubs body is for ID360 ROAD hub using Shimano HG11 or SRAM 9, 10, 11 speed cassettes. Insta Drive 360 Part #: V3430101 Old Part number: V2252001