It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms. Its current transducer is composed by permalloy and hall element, which linearly transform the AC or DC current to ...

Hardware The Dediprog SF100 is designed with an ISP header, through an appropriate connector; users can connect the programmer and drive the SPI signals, supply the memory and control the controller or application status. Please refer to Table 1 for ...

Large Capture Buffer The LAP-C Pro has the largest capture memory on the market. Up to 256Mbits per channel are available, depending on the analyser model. Very Fast Sample Rate The internal clock provides the fastest sample rates. When analysing ...

Combine Raspberry Pi 4 with your Favourite Click Boards™ Start your project development with our Pi 4 Click Shield fast and easy. The Raspberry Pi 4 Model B, combined with the mikroBUS™ and Shuttle socket, provides you immediate access to ...

The TC2030-ALT-NL cable is a special programming cable that has a TC2030 Tag-Connector at one end and a 10-pin 0.1″ pitch female IDC connector at the other. The 10-pin IDC can be plugged directly into some Altera USB Blasters and ...

This product is intended to temporarily hold a TC2030 -NL ("No Legs") cable in place on a PCB. This solution will help when board space is at a premium and you need a hands free solution for debugging.We recommend keeping ...

The Tag-Connect TC2030-IDC-NL is the "No Legs" 6-pin Plug-of-Nails™ programming cable fitted with a 6-pin 0.1″ pitch ribbon connector.With its tiny 0.02 sq inch footprint the TC2030 Tag-Connector has a footprint using about the same PCB space as an 0805 ...

The Tag-Connect TC2030-MCP cable is primarily intended for use in development environments and is also ideal for production programming. The spring-loaded contact pins are held firmly in place by four plastic legs each of which clips securely into its own ...

Tag-Connect's TC2050-IDC "Legged" Plug-of-Nails™ programming cable is a 10-conductor cable fitted with a spring-pin Tag-Connector that conveniently plugs directly into your PCB and terminates in a 0.1″ ribbon connector. Plugs straight to your PCB – No mating connector or header ...

Tag-Connect's TC2050-IDC-NL "No Legs" Plug-of-Nails™ programming cable is a 10-conductor cable fitted with a spring-pin Tag-Connector that conveniently plugs directly into your PCB and terminates in a 0.1″ ribbon connector. Plugs straight to your PCB – No mating connector or ...

The Tag Connect TC2070-IDC-14-Pin legged cable with Ribbon connector.

Full Description The Total Phase Aardvark I2C/SPI Host Adapter is a USB-powered host adapter designed for electronic design engineers who need reliable, controllable access to I2C and SPI buses during bring-up, debugging, and production scripting. Operating as both master and ...

Total Phase Beagle I2C interface Real Time Data Display Data captured by the Beagle I2C/SPI Analyser is instantly displayed onscreen. This is especially useful when capturing slow data from HMI devices; the effect of a change can then instantly be ...

How Does The IRNSS Click Board™ Work? The IRNSS Click Board™ as its foundation uses the L89H, a high-performance acquiring and tracking IRNSS-enabled GNSS module from Quectel Wireless Solutions. It achieves a high industrial level of sensitivity, accuracy, and TTFF ...