BZ series pump heads are designed for high reliability. Thanks to their fixed occlusion, they are perfectly dimensioned to each tubing size to provide the highest accuracy. Free silicone tubing included. General BZ pump heads are manufactured from high-quality polycarbonate ...
The KZ25 from Longer is a high flow rate pump head for up to 6000 mL/min, with a fast tubing loading mechanism. With stainless steel rollers, PPS compression block and a transparent housing in PC, it resists harsh environments and ...
The Fluidic 983 Channel Interaction Chip by Microfluidic ChipShop enables the assessment of molecules migrating between compartments under microfluidic flow. It features 5 independent channel designs with varying dimensions and includes 3 parallel channels separated by pillar barriers in each ...
FG15-13 and FG25-13 pump heads are designed for medium to high flow rate. It is easy to change tubing quickly thanks to the flip cover: open the flip, load your tubing, and close it. Free silicone tubing included. General The ...
A basic peristaltic pump to cover a wide range of applications, from 0.06 mL/min to 1100 mL/min. Silicone tubing included with each pump channel. General The BT300-2J is a basic peristaltic pump for general laboratory applications. Speeds from 1 to ...
The Fluidic 568 Organ-on-a-Chip by Microfluidic ChipShop is a cost-effective and compact solution for recreating in vitro biological barriers. Each chip features two distinct culture chambers, allowing the co-culture of various cell types in two independent compartments separated by a ...
A basic peristaltic pump to cover a wide range of applications, from 0.06 mL/min to 2200 mL/min. Silicone tubing included with each channel. General The BT600-2J is a basic peristaltic pump for general laboratory applications. Speeds from 1 to 600 ...
A kit with a reservoir and accessories to perform direct flow or pressure-driven flow control using Bartels mp6 micropumps. General This bundle contains the components for direct flow and pressure-driven flow applications. It can also be used as a damper ...
This PEEK 1/4-28 union adapter is designed to connect two rigid tubings. Optional 1/4-28 PEEK fittings and ETFE ferrules for 1/16" OD or 1/8" OD tubing. General The 1/4-28 union efficiently connects tubing in a microfluidic system where a dependable ...
These 10-32 coned fittings for 1/16" OD tubing are made of biocompatible PEEK and are part of the NanoPort kit. Sold in packs of 10. General 10-32 coned port configuration Short headless fittings Highly inert and chemical-resistant PEEK material for ...
Ferrules in ETFE for 1/16" OD tubing. Use these ferrules with the NanoPort assemblies. Sold in packs of 10 units. General Connect your 1/16" OD rigid tubing to your chip through the NanoPort assembly, using this ETFE ferrule. Content 10x ...
The Fluidic 283 Chip by Microfluidic ChipShop is designed for particle and cell sorting using a sheath flow on the sample stream, as well as for droplet generation and LNP generation with the Elveflow LNP Pack. Available in PMMA or ...
The Fluidic 846 Organ-on-a-Chip by Microfluidic ChipShop offers an affordable and compact way to recreate biological barriers in vitro. Each chip features a large chamber divided by a permeable membrane, enabling co-culture within the space. The chip is fabricated in ...
Microfluidic valve to use anywhere in your microfluidic setup with the new Elveflow MUX Wire. The valves are controlled through the new MUX Wire v3 from Elveflow, using a USB-C interface. General Elveflow’s Smart Valves design makes them compatible with ...
The Fluidic 747 Organ-on-a-Chip by Microfluidic ChipShop is a budget-friendly and compact solution for simulating in vitro biological barriers. Each chip contains two culture chambers connected via their upper compartments, with both chambers featuring two sections divided by a permeable ...
The Fluidic 219 Organ-on-a-Chip by Microfluidic ChipShop provides an affordable and compact method for replicating biological barriers in vitro. Each chip features four open culture chambers, allowing direct access to the membrane area. The chip is fabricated in Topas (COC, ...
4.5 mL interaction tanks to be used with ChipShop open membrane chips and store liquids. Available with or without Luer caps. Sold in packs of 10. General With their specially designed interface, these 4.5 mL tanks connect to ChipShop open ...
The Fluidic 533 Micromixer Chip by Microfluidic ChipShop, crafted from Topas (COC), is designed for efficient fluid mixing using phase guides. It features mini Luer connections for leak-free junctions with inlet and outlet tubings. General This micromixer is based on ...
The Fluidic 134 Rhombic Chamber Chip by Microfluidic ChipShop features multiple reaction chambers with varying volumes, each equipped with two mini Luer inlets and outlets. Made from either PMMA (Polymethyl methacrylate) or Zeonor (COP, cyclic olefin polymer), this chip offers ...
A set of 10 PTFE plugs to block any inlet/outlet. For use in combination with the Fluidic Connect Pro chip holder and 1/16" OD tubing. General These Teflon plugs block the flow from or to channel inlets/outlets of the Fluidic ...
FluoSurf is an emulsion stabilizer in fluorinated oil specifically formulated for droplet-based microfluidic applications, such as single-cell analysis. Biocompatible, it is highly stable even with pH or temperature variations, allowing the production of reproducible droplets. FluoSurf-O shows a lower autofluorescence ...
FluoSurf is an emulsion stabilizer in fluorinated oil specifically formulated for droplet-based microfluidic applications, such as single-cell analysis. Biocompatible, it is highly stable even with pH or temperature variations, allowing the production of reproducible droplets. FluoSurf-S has a lower molecular ...
