Easily connect soft-walled tubing such as peristaltic tubing to 1/4"-28 ports using this adapter made in inert ETFE material. Available for 1/16" ID or 1/8" ID soft-walled tubing. General Connect 1/16" or 1/8" ID soft-walled (peristaltic) tubing to 1/4"-28 thread ...

These barbed to male Luer adapters are a convenient way to connect soft-walled tubing to Luer Lock or Luer Slip devices (such as syringes). Manufactured in polypropylene, they are ideal for use with most aqueous solutions. General Easily connect 1/16", ...

A bubble trap to get rid of bubbles in your flow stream. Air bubbles in a liquid sample are a typical issue often found in microfluidic experiments, and their elimination in the sample is quite usually hard to achieve. Available ...

This 4 Straight Channels Chip by Microfluidic ChipShop, crafted in PMMA or COC, features 4 parallel channels in various thicknesses and is manufactured via injection molding. Mini Luer connections provide leak-free inlet and outlet tubing junctions. General ChipShop chips are ...

This 1/4"-28 fittings connection kit for 1/16" OD tubing is made of PFA (Teflon) and ETFE to ensure its high chemical resistance. Reusable, highly versatile, and compatible with a large range of microfluidic equipment. This kit contains 10x 1/4"-28 to ...

This micromixer chip is a useful tool for mixing liquids through the herringbone-shaped channel optimally. Its convenient 1/4-28 UNF threaded ports allow to connect the chip to your setup in a second! General The easy set-up of this versatile glass ...

The New Era NE-300 InfusionOne is a basic, easy-to-use one channel infusing syringe pump. It is the most cost-effective solution to begin working with microfluidics. Flow range from 12.2 nL/min up to 20.95 mL/min, +/- 1% accuracy. General No withdrawal, ...

A 10 m roll of Tygon tubing 1/16" OD x 0.02" (0.51 mm) for your daily needs. General Connect every element of your microfluidic system: reservoirs, flow manifold, flow splitters, bubble trap, etc… This Tygon tubing has been specifically formulated ...

The Fluidic 263 Male Luer Fluid Connectors by Microfluidic ChipShop are designed to seamlessly connect your tubings to Luer-compatible chips. Suitable for silicone or flexible tubing with an ID ≤ 1 mm. Sold by packs of 10 connectors, available in ...

Merge or split up to 6 microfluidic flows using this 7-port manifold. Optional 1/4-28 PEEK fittings and ETFE ferrules for 1/16" OD or 1/8" OD tubing. General This PEEK Manifold Assembly can be easily applied for a multi-Ports mixing chamber, ...

A kit of female Luer Lock ETFE adapters to male ¼"-28 threaded fittings. Can be used for connections involving both liquids and gases. General Female Luer Lock to male 1/4-28 adapters in ETFE, made to interface any Luer or Luer ...

These microscope USB 3.0 cameras offer great imaging performances. Thanks to their consistent and high-quality image acquisition they are ideal for use in any laboratory setting with your existing microscope equipment. These cameras provide excellent color reproduction and high-resolution imaging ...

Versatile microfluidic reservoir caps made of corrosion-resistant and autoclavable Delrin that can be fitted onto standard GL45 glass bottles. A choice of two different microfluidic caps with either two or four 1/4-28 threaded ports, allowing customizable interfaces with microfluidic fittings. ...

NanoTight sleeves are designed to adapt 1 mm OD tubing to 1/16" OD connectors. Carefully manufactured in highly-inert FEP fluoropolymer (an excellent alternative to PTFE), they fit perfectly to NanoTight and flangeless fittings. General Seamlessly connect 1 mm OD tubing ...

Fully programmable peristaltic pump with dispense and withdrawal pumping available. Can be used manually or with a PC through an RS-232 communication port. PC cable and software are offered separately. General This pump is fit for use in many settings. ...

These unique adapters connect peristaltic tubing to standard 1/16" OD tubing. Two options are available according to the ID of the peristaltic tubing: Small (ID between 1.20-2.80 mm) and Large (ID between 2.55-3.80 mm). General This adapter is used to ...

PTFE or Teflon is widely used in microfluidic experiments due to its excellent solvent resistance, higher continuous service temperature and superior polymer purity. Teflon PTFE tubing with 1/16" (1.6mm) OD and various IDs (from 0.2 mm to 1 mm) for ...

FluoSurf is an emulsion stabilizer in fluorinated oil specifically formulated for droplet-based microfluidic applications, such as single-cell analysis. Biocompatible, it is highly stable even with pH or temperature variations, allowing the production of reproducible droplets. FluoSurf surfactant comes diluted in ...

Punch easily through PDMS or any soft substrate with these pen-sized punches. Lock the cutting tip in position to protect the user when not in use, and eject the punched sample/substrate easily with a push button. The punches come sterile, ...

These swivel barbed adapters have been design for easy connection to soft-walled tubing. The central barb can spin freely from the nut to prevent tubing twist during the connection. Manufactured in polypropylene for various tubing sizes. Sold by packs of ...

An assortment pack of 100 Luer Lock blunt-end needles. Contains 10 units of each of the following gauge sizes: 14G, 15G, 16G, 18G, 20G, 21G, 22G, 23G, 25G, 27G. Blunt-end syringe needles avoid any cutting of the tubing or injuries ...

Bartels mp6 series micropumps are a revolution in the field of microfluidics. Capable of transporting a very small quantity of liquid or gas, the micropumps of the mp6 series are characterised by the combination of 2 piezo actuators in a ...

This bubble trap is a simple yet effective device to remove the bubbles in your flow stream. Manufactured in PEEK, its body is entirely autoclavable and biocompatible. Available in 3 versions of the internal volume: 23 µL (S), 95 µL ...

One-piece fittings combine a nut and a ferrule built into one fitting, so you never lose the ferrule or stuck it in the receiving port. These Fingertight fittings manufactured in PEEK are designed to easily connect a 1/16" OD tubing ...