The Amfeltec SKU-012-01 TTL-RS-232C Converter is used to connect a Serial UART to your computer's motherboard via a standard RS-232 port. This easy-to-install adapter is a cost-effective solution for connecting the UART Bus to the computer and comes in a ...

The Amfeltec SKU-034-04 is a flexible adapter used to convert the MiniPCI Express Bus of a motherboard into two 32-bit PCI Buses. This is achieved by connecting the standard two 32-bit PCI expansion boards to the MiniPCI Express connector provided ...

The Amfeltec SKU-035-05 is a flexible adapter that is used to convert the MiniPCI Express Bus of a motherboard into an x1 PCI Express bus and extend it. This is achieved by connecting the x1 PCI Express expansion add-in board ...

The Array Electronic 3315 GPIB (IEEE488) interface for the Array 3720A and 3721A electronic loads.

The Array Electronic 3710A DC Programmable Electronic Load is designed to dissipate 150W and is ideal for battery, solar cell, power driver and power supply testing.

ISP Cable Connector Pin Out (2x5) 1 IO2 VDD 2 3 VCC GND 4 5 CS CLK 6 7 MISO MOSI 8 9 VPP-9V I/O3 10

The Total Phase TP320710 Digital I/O Cable provides grabber clips to help connect the digital IO interface of the Beagle™ USB 480, 5000 and Komodo™ CAN protocol analyser to external logic signals.

Lineeye LE-DIN13 DIN Rail Mounting Plate for LE-270PS CAN Bus Analyser. Designed to fit a LE-series data logger into the production environment for long-term applications.

The dsPIC-Ready3 Board is the best solution for fast and simple development of 28-pin dsPIC30F microcontroller applications (dsPIC30F2010, dsPIC30F3010, dsPIC30F4012, dsPIC30F2012, dsPIC30F3013 etc.). It includes connectors for connecting the dsPICprog with mikroICD in-system stand-alone programmer. These connectors enable you to ...

Lineeye OP-SB7GX LE-2500-E, LE-3500-E CAN/LIN Bus expansion Kit. OP-SB7GX is the expansion kit that makes it possible to monitor and simulate CAN and LIN communications. It enables monitoring of CAN and LIN data in any combination up to 2 channels ...

Lineeye OP-SB87 LE-8200-E CAN/LIN Bus expansion Kit.

The Amfeltec SKU-035-01 is a flexible adapter that is used to convert the MiniPCI Express Bus of a motherboard into an x1 PCI Express bus and extend it. This is achieved by connecting the x1 PCI Express expansion add-in board ...

The Hantek HT307 Acupuncture Probes are designed for probing difficult-to-reach signals protected by insulation. Acupuncture probes can be fixed to the end of a standard Multimeter lead. The acupuncture probe can be used when it is necessary to probe signals ...

The Rotary O Click Board™ carries a 15-pulse incremental rotary encoder with detents, surrounded by a ring of 16 orange LEDs. It's a perfect solution for adding a precision input knob to your design.

The Amfeltec SKU-032-01 MiniPCI Express System Timer uses a standard USB interface to synchronize IP signals. This system timer provides accurate clock timing for the Asterisk PBX.

The Amfeltec SKU-056-01 PCIe to miniPCI Adapter Card has been designed to convert the x1 PCI Express bus into the MiniPCI Express bus via a flexible cable.

The SKU-002-01 Universal Byte Blaster from Amfeltec is a device that allows you to program and debug onboard CLPC and FPGA devices. The ByteBlaster is compatible with target systems working on voltage ranging from 1.2V to 5V. It converts the ...