These GRP 150mm Pro Series aluminum rods are designed for a standard 2.0L 7-bolt 4G63 (Evo 4/5/6/7/8/9 and 7-bolt DSM).Following a new trend to reduce reciprocating weight, GRP's latest connecting rod is designed around the smaller 1.888" crank journal. The ...

The STM R35 GTR y-pipe features a free-flowing, straight-through design, fully T304 stainless construction and TIG welded in-house. If you're looking to free up air flow for track days, this is exactly what you need. Available with a 3.5" flange ...

Hawk HPS High Performance Street brake pads for the Nissan R35 GTR. These pads are a great choice for a modified street build! Low dust, quiet pads with a little noise if it is cold or damp. One of the ...

NGK LFR7AIX spark plugs for the 2006-2014 WRX and 2004+ Subaru STi models. These are one step colder than stock with a heat range of 7. Plugs are sold individually. Price is for one plug, please adjust quantity as needed.Vehicle ...

Damaged or broken water lines on your Subaru turbo? This kit has all the pieces to get you back on the road! This kit is only to be used with FP Subaru turbos and is not compatible with factory turbos. ...

Vehicle Fitment:Universal Product (Requires Welding)• Fits GT28 GT30 GT35• V-Band Exhaust Housing• 2.125" Inlet (Manifold to Turbo)Description:Genuine TiAL Sport 2.125" matching weld-on inlet flange for the GT28, GT30 and GT35 stainless turbo exhaust housings. If you're welding a custom exhaust ...

If you have issues with crankcase pressure blowing out your dipstick, STM has the solution! This tube starts as a brand new, OEM piece with a -6AN bung welded to allow you to vent to a catchcan, relieving pressure. The ...

The Radium Fuel Surge Tank (FST) is available for use with a single pump or dual pump. The FST helps prevent fuel starvation to the engine on vehicles with inadequate fuel tank baffling and will directly feed the fuel rail ...

Record-setting research and development! The ETS intercooler for Evo X is available with your choice of core thickness and choice of color anodizing, with or without the ETS stencil logo. Intercooler inlet and outlet are placed in the factory location ...

Competition Clutch Stage 2 clutch kit is a direct replacement for the Evo 7/8/9 and can also be used in the Evo 4/5/6 if paired with an Evo 7/8/9 flywheel. Includes the pressure plate, steelback sprung disc, throw out bearing ...

Replacement clutch alignment tool and release bearing (also known as throw out bearing or TOB) for the Evo X Twin and Triple EXEDY clutch kits. Also fits more clutch kits below.Compatible with these clutch kits:• MM063SB (Evo X Triple Cerametallic)• ...

Vehicle Fitment:2006 Mitsubishi Lancer Evolution IX JDM* Fits the JDM IX rear bumper onlyDescription:Rexpeed CT9A Carbon Fiber Rear Bumper Extensions for the Evo 9 JDM rear bumper are sold as a pair and include new hardware.Includes:(2) Extensions(10) Bolts(10) NutsInstall Notes:• ...

Vehicle Fitment:2008-2015 Mitsubishi Evolution XDescription:Genuine OEM Mitsubishi factory replacement left hand side front bumper grille cover fits all Evo X models. This is the LH side cover. See diagram image for exact placement. The matching RH side is linked below.Includes:(1) ...

Vehicle Fitment:2005-2006 Mitsubishi Evolution VIII-IX(6-Speed MR transmission only)Description:Genuine OEM Mitsubishi factory replacement transmission back-up light switch for the 6-speed Evo 8/9 MR.Includes:(1) Switch Mitsubishi Part Number Diagram PNC MN132387 23024

The Enkei RPF1 center cap features the silver finish with with a "carbon fiber" look decal and red RPF1 logo. So we are clear, it is not real carbon fiber, it is a printed decal. These center caps will fit ...

Vehicle Fitment:2001-2006 Mitsubishi Lancer Evolution VII VIII IXDescription:Genuine OEM Mitsubishi factory replacement front bumper bolt for the Evo 7/8/9 CT9A models. This is the cursed M6x14 bolt that breaks on almost every Evo that has seen salt. Ask me how ...

Vehicle Fitment:2008-2015 Mitsubishi Lancer Evolution XDescription:Genuine OEM Mitsubishi factory replacement 5-speed shifter cable clips for the Evo X manual transmission models. Two clips are needed, one for each cable. Sold individually as needed. Price is for one clip.Includes:(1) Clip Mitsubishi ...

Vehicle Fitment:2001-2006 Mitsubishi Lancer Evolution VII VIII IXDescription:Genuine OEM Mitsubishi factory replacement rear bumper mounting bolt for the CT9A rear bumper. Fits all JDM and USDM 7/8/9 models. Two M6x16 bolts with paint protective gasket are used on the bumper, ...

Vehicle Fitment:2003-2006 Mitsubishi Evolution VIII IX(* Fits some late model Evo 7 *)Description:Genuine OEM Mitsubishi factory replacement throttle body sensor screws for the Evo 7/8/9 models. Three screws will be used to attach the idle speed control sensor (ISC) and ...

Vehicle Fitment:2001-2006 Evolution VII VIII IXDescription:Genuine OEM Mitsubishi factory replacement clip for the rear window molding. Five of these phallic clips are used in the diagram. Sold individually as needed. Price is for one clip.Includes:(1) Clip Mitsubishi Part Number Diagram ...

Replacement drain plug for the Koyo Racing aluminum radiators.Includes:(1) Plug with Washer

Vehicle Fitment:2006 Mitsubishi Lancer Evolution IXDescription:Genuine OEM Mitsubishi factory replacement JDM Evo 9 black Lancer trunk badge. Also called a mark, logo or emblem.Includes:(1) Badge Mitsubishi Part Number Diagram PNC 7415A008 97088

Injector Dynamics ID 1300 fuel injectors for the 4G63 Evo 1-9, 1G/2G DSM and GVR4 models. Includes a full set of 4 injectors with the proper 90.1 plug and play adapters. E85 safe!Vehicle Fitment:Mitsubishi 4G631992-2006 Evolution I-IX1990-1999 Eclipse GST/GSX1990-1998 Talon ...

The STM stainless high flow cat for Evo 7/8/9 features a full stainless steel construction, tig-welded in house at STM and utilizes the GESi GEN1 ultra high output EPA compliant catalytic converter. Bolts right in place of your stock cat ...