The STM rear toe arm eccentric bolt kit is comprised of all OEM Mitsubishi bolts for a perfect replacement fit on your 1995-1999 all wheel drive 2G DSM. Requires one kit per side.Vehicle Fitment:1995-1999 Eclipse GSX AWD1995-1998 Eagle Talon TSi ...

The STM rear toe arm eccentric bolt kit is comprised of all OEM Mitsubishi bolts for a perfect replacement fit on your 1995-1999 front wheel drive turbo 2G DSM. Requires one kit per side.Vehicle Fitment:1995-1999 Eclipse GST FWD1995-1998 Eagle Talon ...

STM 20mm wheel spacer kit for DSM, Evo, GVR4 and 3000GT/Stealth can be used on the front or rear. The spacers have a 5x114.3 bolt-pattern with a 67.1mm hub. Elongated wheel studs are required when running these spacers so we ...

The STM MAP sensor adaptor allows you to replace the OEM MAP sensor with an aftermarket pressure sensor that utilizes an 1/8" NPT thread. The new STM design has counter sunk holes to allow easy tool access and comes with ...

The STM long battery tie down plate can be used as a dress-up piece for custom applications with 680 or 925 style batteries. Measures 8-5/16" long with 7-5/8" between the bolt holes. These are the same tie-downs used on the ...

ACL 4G63 Standard Balance Shaft Bearing Set includes three bearings as pictured for the Mitsubishi 4G63 Evo I-IX, 90-99 DSM and GVR4.Vehicle Fitment:Mitsubishi 4G631992-2006 Evolution I-IX1990-1999 Eclipse GST/GSX1990-1998 Talon TSi1990-1994 Laser RS1991-1992 Galant VR4Includes:(3) Bearings See more ACL Products

Muteki open ended lugs are designed to accomodate longer wheel studs over stock. Lightweight, cold-forged steel. Available in black, red, purple, blue and chrome finishes. Includes a full set of 20 nuts with lug key.Vehicle Fitment:• M12 x 1.5 Lug ...

Genuine OEM Mitsubishi factory replacement front wheel bearing fits all Evo X models. Sold individually. Price is for one bearing.Fits these Applications:2008-2015 Mitsubishi Lancer Evolution XMitsubishi PNC Reference Number:32512A

Gates timing belt replacement kit for the 1995-1999 2G DSM models includes the standard replacement black Gates timing belt, balancer belt, idler pulley, tensioner pulley and the balance shaft pulley. The black Gates standard replacement belts are recommended for use ...

The Injen IS Series air intake for 2G DSM is designed for use with the factory mass air flow sensor and available non-recirculated or recirculated to vent to a stock or factory-style blow off valve. Includes the polished intake pipe, ...

The S90 direct bolt-on throttle body for Evo 1/2/3 and 1G/2G DSM is precision CNC machined from AL6061 T6 billet aluminum for increased durability. Available with a 70mm or 74mm bore size and includes a new gasket and mounting hardware.Vehicle ...

Driveshaft Shop Level 0 front axles for Evo 7/8/9. These axles are a superior choice for a stock replacement or swap. These are not recommended for racing use and are meant for basic daily driving only.Vehicle Fitment:2001-2006 Mitsubishi Evolution VII ...

This glorified zip tie has many different applications, but if you're doing some custom work, the nifty, little clips snap right into body holes making things neat and snug.Fits these Applications:Mitsubishi Evolution 1/2/3/4/5/6/7/8/9/X, DSM, 3000GTVarious placements throughout CT9A, CZ4A, CP9A, ...

Genuine OEM factory replacement axle clips for the Evo 4/5/6/7/8/9 models. Fits both front and rear LH and RH sides. Sold individually as needed. Price is for one clip.Fits these Applications:1996-2006 Mitsubishi Lancer Evolution IV V VI VII VIII IXMitsubishi ...

Genuine OEM factory replacement axle nut/castle nut, lock washer and cotter pin for the Evo 1-9, 1G/2G DSM, GVR4 and 3000GT Stealth models. Fits both front and rear LH and RH sides. STM sells this as a kit for one ...

Genuine OEM Mitsubishi factory replacement gearshift lever retainer for the Evo 7/8/9 5-speed models.Fits these Applications:2001-2006 Mitsubishi Lancer Evolution VII VIII IXMitsubishi Reference Number:24067

Genuine OEM Mitsubishi factory replacement rubber clutch and brake pedal pads fit most Mitsubishi applications including the 1G/2G DSM, 3000GT/Stealth and all Evolution IV-X models. Sold individually. Price is for one pad.Fits these Applications:1996-2006 Mitsubishi Evolution IV V VI VII ...

Genuine OEM Mitsubishi factory replacement front suspension strut top mount fits all CT9A Evo 7/8/9 models.Fits these Applications:2001-2006 Mitsubishi Evolution VII VIII IXMitsubishi Reference Numbers:40025

GSC Power-Division race balance shaft for 4G63 Evo and DSM. Don't let removing your balance shafts shorten your oil pump and engines life. GSC has a race balance shaft that will go in place of the OEM balance shaft and ...

Mishimoto magnetic engine oil drain plug has a M14 x 1.5 thread and can be used to replace the engine oil drain plug on most Mitsubishi cars including all Evo models, 1G/2G DSM, GVR4 and 3S. Also fits all 1984+ ...

Genuine OEM Mitsubishi factory replacement Evo 8/9 shifter console panel for the 5-speed transmission. Vehicle Fitment:2003-2006 Mitsubishi Lancer Evolution VIII IX• Fits 5-Speed models onlyMitsubishi Reference Numbers:24054 MR647677 (5-Speed - Pictured)24054 8015A001HA (6-Speed - Discontinued)Notes:The 6-Speed panel (8015A001HA) is discontinued ...

Genuine OEM Mitsubishi JDM radio double din bezel fits all Evo 7/8/9 models. Standard satin silver finish. You will need to find an aftermarket or custom solution for your HVAC relocation, but this will allow you to install a double ...

Genuine OEM Mitsubishi factory replacement rear bumper license plate bracket for the JDM Evo 9 rear bumpers. This is one of those detail pieces you'll need if swapping a JDM IX rear onto your Evo. *Discontinued* Unfortunately these were discontinued ...

Genuine OEM Mitsubishi factory replacement front bumper grille mesh pieces for the Evo 9 bumpers. Pieces are sold individually as needed.Vehicle Fitment:2006 Mitsubishi Lancer Evolution IX Part Number: Diagram Number: Description: Notes: 6402A033 62082 Upper Support Mesh - 6400A387 62035B ...