STM drive shaft carrier bearing support bushings are a direct replacement for your worn-out, factory, rubber bushings giving you a more solid feel overall and helping to keep the driveshaft firmly in place for a smooth rotation.These bushings are available ...

The STM Coil-On-Plug (COP) Ignition System fits all Evo 4/5/6/7/8 is a direct replacement to your factory coils and wires and simply plugs in and bolts down! This piece will fit under your factory spark cover, or you can leave ...

Vehicle Fitment:1996-2006 Mitsubishi Evolution IV V VI VII VIII IX1990-1999 1G & 2G DSM (Eclipse GST/GSX, Talon TSi & Laser Turbo) Description:The STM Stainless Steel Clutch Line is a direct replacement for your worn out rubber line and will give ...

The STM Evo X Stainless Steel Catback Single Exit Exhaust weighs in at only 18.2 pounds and will bolt up to your stock or aftermarket 3" cat or testpipe. The STM Exhaust utilizes your existing exhaust hangers and includes all ...

The STM Evo 7/8/9 radiator brackets are a direct bolt-on replacement your ugly, stock brackets that are probably rusted and corroded by now. Available with the raw aluminum finish or anodized black and these can be purchased as the pair ...

The STM Evo 8/9 Rear Bumper Support is designed to fit both USDM 8/9 and JDM 9 rear bumpers. Made in-house of 1 5/8" chromoly steel, weighing in at only 6 pounds and finished with a durable, wrinkle black powdercoat. ...

Description:We have searched out the very best silicone hose manufacturers and are proud to offer our own brand of STM silicone couplers. We would not put our name on these if they were nothing less than the best!Couplers are black ...

The redesigned STM 4G63 cam alignment tool features an open center with pointers to help locate the timing marks on your DSM cam gears. While its a subtle change to the old tool, it certainly helps ensure things are timed ...

A must-have if you are installing a new clutch! This ACT one-piece Monoloc provides uniform loading on the bearing and pressure plate. This is a direct replacement upgrade to the standard two-piece wedge collar and wire ring featured in pull-type ...

ARP 207-5401 main studs for 4G63 Evo 1/2/3/4/5/6/7/8/9, 1G/2G DSM and GVR4. Kit includes a full replacement set of 10 studs, 10 nuts and 10 washers with assembly lube. This kit fits both 6-bolt and 7-bolt engines.Vehicle Fitment:Mitsubishi 4G63• 1992-2006 ...

Genuine OEM Mitsubishi factory replacement engine oil filter for the 1G DSM, Evo 1/2/3/4/5/6/7/8/9/X, GVR4, Stealth and 3000GT models. If your drain plug is getting beat up, pick up a new Drain Bolt MD050316 and Crush Washer MD050317. Vehicle Fitment:1992-2015 ...

The EuroExport 4G63 valve spring compressor tool makes installing valve springs in your DSM or Evo easy! Simply align the holes on the aluminum body of the valve spring compressor with the ones on the head, bolt it using the ...

The Tomei Expreme Heat Shield is made from high grade aircraft quality stainless steel SUS304. Fits all Evo 4/5/6/7/8/9 stock manifolds to keep the exhaust temps contained and your bay looking fresh.Vehicle Fitment:1996-2006 Mitsubishi Evolution IV V VI VII VIII ...

GSC Power-Division ZERO-TICK lifters for the 4G63 Evo and DSM utilize a stiffer spring inside to help keep the lifter at its operating height even when oil pressure is low. Includes a full set of 16 lifters. Lifters must be ...

Evo X cold start relay replacement kit. STM offers this relay kit comprised of all OEM Mitsubishi parts. There is a known cold-start issue with the relays located in the engine bay fuse box caused by condensation freezing inside the ...

Genuine OEM Mitsubishi factory replacement Mobil 1 engine oil cap for the Evo 8/9 can be used with all 4G63 Evo 1-9, 1G/2G DSM and 6G72 3000GT/Stealth valve covers. Vehicle Fitment:1992-2006 Evolution I-IX1990-1999 Eclipse GST/GSX1990-1998 Talon TSi1990-1994 Laser RS1991-1992 Galant ...

Vehicle Fitment:1996-2006 Mitsubishi Evolution IV-IX (5-Speed)2008-2015 Mitsubishi Evolution X (5-Speed)1990-1999 1G & 2G DSM (5-Speed)1991-1999 3000GT VR-4 (5 & 6 Speed)Description:Genuine OEM Mitsubishi factory replacement transmission reverse back-up light switch for the 5-speed Evo 4/5/6/7/8/9/X, 1G/2G DSM and also fits ...

Omni Power replacement MAP sensors are available 3, 4 and 5 Bar and are compatible with all Evo 7/8/9, Evo X, 2G DSM and 3000GT/Stealth models. This is not a stock replacement sensor. You will need to have your car ...

This tool by Extreme Psi will allow you to accurately apply the correct preload to the eccentric timing belt tensioner pulley with the engine mounted in the vehicle. This tool has a hex boss to accept your 8mm socket.For use ...

The STM Shifter Cable Bushings for 1G/2G DSM, GVR4, Evo V/VI, 3000GT and Stealth models will give you firm, more consistent shifts. Upon install, we recommend a touch of anti-seize on the shaft to help reduce friction.Vehicle Fitment:1990-1999 Eclipse GST/GSX1990-1998 ...

Genuine OEM Mitsubishi Ignition Starter Switch fits all the 2001-2015 Evolution 7/8/9/X models.Fits these Applications:2001-2006 Mitsubishi Lancer Evolution VII VIII IX2008-2015 Mitsubishi Lancer Evolution XMitsubishi Reference Number:82005Old / Alternate / Superseded Part Numbers:MR449457

Comprised of genuine ARP stainless hardware, STM has gathered the perfect bolt kit to compliment the exhaust manifold on your 7-bolt DSM or Evo 1-9 without rusting!Vehicle Fitment: CD9A Evolution I CE9A Evolution II III CN9A Evolution IV CP9A Evolution ...

The Forced Performance cast race manifold for the Evo 4-9 features 20% larger runners and collector entry angles that would make a tubular header blush. Durable high temperature alloy to resist cracking and compatibility with the original factory heat shield ...

Vehicle Fitment:1991-1999 3000GT & Stealth Twin Turbo Description:The 3S Master To Slave Stainless Steel Braided Clutch Line will run directly from your Master Clyinder to your Slave Cylinder. This one-piece line will eliminate the stock rubber lines and the expanding/contracting ...