IN STOCK E10-42-047-05-22 | PRO-KIT Performance Springs (Set of 4 Springs) Description Ride Height: 0.6 in (Front) | 0.7 in (Rear)#1 Choice of Performance Springs for Automotive Enthusiasts!Top-Performance HandlingLower center of Gravity - Lowers Vehicle up to 1.5"Progressive Spring DesignPrecision ...

IN STOCK Great Brake fluid for street/track performance 2 bottles needed for flush. Extreme high performance polyglycol brake fluid. Far exceeds the standards of DOT 4. Each bottle is filled with Nitrogen, increasing shelf life and eliminating contamination while factory ...

IN STOCK Great Brake fluid for the track 2 bottles needed for flush. Very high dry boiling point of 617F (325C) and a wet boiling point of 400F (204C). For all types of hydraulic brake and clutch actuators requiring non-silicone ...

In Stock! No Waiting! N Performance Hood Properly vented to allow extra cooling into the engine bay. Carbon Fiber Fits Hyundai Veloster Turbo and Veloster N Body code JSN or JS. Shipping to the USA is about 200-400 USD depending ...

IN STOCK Fits Kona N and Veloster N using Elantra N turbocharger. Flow and Performance:Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This charge pipe kit provides a smooth transition between ...

In Stock Product Description Highlights: Gains of 21BHP Increase of 28NM of torque 27% more volume over OEM Bar and plate design Designed and manufactured in the UK Lifetime warranty Following the success of our performance enhancing products for the ...

Active Profile Stand out from the crowd Cruise the highway or hit the track with an MBRP Street Profile exhaust. It’s the perfect mix of aggressive sound when you’re into the throttle without being obnoxious on long drives. Product Description ...

In Stock Fits Hyundai Santa Cruz 1.6FI and related 1.6FI Engines (Sonata / Tuscan ETC) Kia K7 Intake system upgrade while keeping a closed loop OEM intake. Added Performance without any worries of dealership warranty issues. Some people prefer these ...

IN STOCK Available in Race only The missing link, until the release of this product, all aftermarket bushings and control arms have been available other than this one. Now it finally is from Powerflex. 2x Powerflex PFR26-115 PU Rear Trailing ...

IN STOCK Now you can buy flash tools for N Series cars which run off laptops, these tools are very cost effective and are NOT VIN locked or vehicle locked in anyway. Remotely tune your N Series car with no ...

ON ORDER Looking for a brake upgrade while using the OEM Caliper? Our new upsized floating rotor is 2mm thicker than stock, the same size rotor as our GT BBK! Combined with Hawk HP Plus pads which are included, this ...

In Stock We suggest 1.6T uses number 2-4 and 2.0T to use 4-8 depending on setup. 3.3TT should use 7-10 Our project Veloster N runs a #5 and a #1.5 (dual injection) Snow Performance / Nitrous Express now offers new ...

IN STOCK SNO-38FIL Billet 100 Micron Water Methanol Filter Billet 100 Micron Water Methanol Filter ESTABLISH THE BENCHMARK, RAISE THE BAR, REPEAT! ™ Email a Friend Add to Favorites View Larger SKU SNO-38FIL Description This Snow Performance Billet 100 Micron ...

IN STOCK SNO-40040-BRD Description The Dual Nozzle Upgrade from Snow Performance allows an additional water methanol injection nozzle to be mounted with any water methanol injection system. Related Products

ALWAYS IN STOCK A must when changing nozzles or installation of a new kit. Description Although ACU-SEAL and AN style connections are already sealed all NPT (National Pipe Thread) connections must have sealant to create a lasting leak free seal. ...

IN STOCK SNO-40012 Description The 3 quart water-methanol tank upgrade is designed to clean up your engine bay and move your supply of methanol into the trunk of any vehicle. Small in size (10in x 6.5in x 4in), this water-meth ...

IN STOCK Boost Cooler Stage 2 VC-30 Control Unit Upgrade Variable Injection via Boost Pressure. For all Turbo and Supercharged Engines up to 2.1 Bar Boost Pressure. The Boost Cooler VC-30 control unit from SNOW Performance regulates the water or ...

IN STOCK We use this controller in our project Veloster N. Fits Aeroforce Gauge pods. Boost Cooler Stage 2 VC-50 Control Unit Upgrade Variable Injection via Boost Pressure. For all Turbo and Supercharged Engines up to 3.5 Bar Boost Pressure. ...

IN STOCK SNO-40035 Description Want to know when your water-meth supply is running low from the cab of any vehicle? The low level switch upgrade is designed to be used with any water-methanol reservoir and alert the user of a ...

IN STOCK NOTE: FITTINGS PICTURED ARE NOT INCLUDED! SNO-40060 Snow Performance High Flow Water-Methanol Solenoid Upgrade ESTABLISH THE BENCHMARK, RAISE THE BAR, REPEAT! ™ Email a Friend Add to Favorites View Larger Description The Snow Performance High Flow Water Methanol ...

IN STOCK SNO-40110 Description Need a way to mount your water methanol nozzle into a silicon/rubber intake tube? The Snow Performance nozzle mount adapter gives a secure connection to any water methanol nozzle. 100% Methanol Resistant Delron Contruction 1/8" NPT ...

IN STOCK Description 20ft of black high temp nylon water-methanol tubing

IN STOCK SNO-82082R Description 1/8 NPT-1/4 Quick Connect Fitting for your water/methanol system

IN STOCK A must for WMI systems in turbocharged applications Can be swapped with quick connect fittings Description New Snow Performance high flow inline water methanol check valves offer superior safety and flow compared to other water methanol check valves ...